Tercel4WD.com

checked both sides and their fine...it only does it when i give gas while the wheel is turned...guess it must be my spider gears

i had what i thought was a bad axle issue (drivers side)due to the grinding/knocking noise when i cut the wheel left, so i swap it out and it fixed the problem and due to having bad front tires i leave the car parked after about 30 miles on new axle...i finally put new tires on the front after about...

is it possible? anyone got any pics of a lifted terc?

hook up a Ready-Aire 1722 AC Compressor to an 85 tercel 4wd? is it just a direct replacement?

I need a good working ac compressor for a 1985 tercel 4wd...let me know what you got

PM FOR FASTER REPLYS

I didnt do the timing advance thing would that be the problem?

18.18 mpg .....does this sound like the average mpg out of an auto?

I found what it was. Automatics have a rod that connect to the bell crank on the throttle and run down to the tranny. I had forgot to hook it back up

Does the automatic tranny on these cars run off of vacuum? It runs great when when you shift through the gears manually. I'm thinking maybe the tranny runs off of vacuum cause it will not gear down when in drive at WOT.

no one has any ideas?

Im positive that some thing is wrong. If all Webers bogged this bad no one would have one

it boggs it so bad that it doesnt even gear down (AUTOMATIC) are you sure it s'posed to bog that bad?

ok i got my weber on an working. it idles great but when driving if you apply the gas fast it boggs very badly until it finally catches up with itself. any ideas? do i HAVE to advance the timing if i run the vac line from the dizzy advance to the gas filter or is it just recommended?

The egr has a vacuum line that mounts to it. Is this vac line the one that I run to the gas filter or is the one that hooks to the gas filter already hooked to the gas filter. And I just need to block off the egr one or does it go some where else?

what do you guys do with the other 2 wires coming from the plug that went to the oem carb choke.....i cut the 2 except the red one....i ran it to the choke on my weber...is this ok if i just leave the othe 2 wires not hooked up to anything?